Ozuku asagi

€140.00

138 × 77 × 15 mm

Sides and bottom sealed with transparent lacquer.

A clean, natural mirror on the core; on the clad a silvery, mid-grey haze to semi-mirror, depending on pressure.
Keep it for iron clad, wrought iron and damascus, where you can inspect the tiniest details — a very clean surface on which to see what KREAM Detail can really do.
On honyaki: use it only for the edge.

138 × 77 × 15 mm

Sides and bottom sealed with transparent lacquer.

A clean, natural mirror on the core; on the clad a silvery, mid-grey haze to semi-mirror, depending on pressure.
Keep it for iron clad, wrought iron and damascus, where you can inspect the tiniest details — a very clean surface on which to see what KREAM Detail can really do.
On honyaki: use it only for the edge.

Notes from use — Black slurry in a few strokes. The feedback is very direct: glassy and gentle at the same time. Totally silent sharpening.

A hard, dense Ozuku: 2.91 g/cm³, where almost all Japanese natural stones sit between 2.5 and 2.8 (the extremes run from 2.2 to 2.95). Water hardly penetrates it, so you won't need much, and it rarely needs flattening, so you can work the geometry precisely. With a knife, you need neither a nagura nor a fine diamond plate.

Examine in full resolution:

Measured card for finish 08.5 — Ozuku asagi: the four numbers read from the blade
Measured card for finish 08.5 — Ozuku asagi: the four numbers read from the blade

Edge — mirror on core measured at 3.36 / 5:
Top performance on the finest edges — ura, special food cutting, fine tools, razors — and the base for the highest-contrast kasumi polish.

Edge — mirror on core measured at 3.36 / 5:
Top performance on the finest edges — ura, special food cutting, fine tools, razors — and the base for the highest-contrast kasumi polish.