Mizukihara tomae

€380.00

202 × 76 × 37 mm

Sides and bottom sealed with Japanese urushi.

Great contrast: the core comes close to a semi-mirror and the clad turns bright. It shines most on iron clad and wrought iron.
An asagi on the harder side of hardness Lv 4.

202 × 76 × 37 mm

Sides and bottom sealed with Japanese urushi.

Great contrast: the core comes close to a semi-mirror and the clad turns bright. It shines most on iron clad and wrought iron.
An asagi on the harder side of hardness Lv 4.

Notes from use — Slurry in about ten seconds; water management is easy, a moderate amount is enough. Flatten it with your coarsest diamond plate under firm pressure and you reach a fine, uniform kasumi quicker.
Very comfortable, silky feedback — you can use it with light pressure.

Examine in full resolution:

Edge — mirror on core measured at 2.42 / 5:

A fine bite and toothiness on any core steel, from tamahagane to carbon, and a good performance on the finest edges — ura, special food cutting, fine tools, razors.

Edge — mirror on core measured at 2.42 / 5:

A fine bite and toothiness on any core steel, from tamahagane to carbon, and a good performance on the finest edges — ura, special food cutting, fine tools, razors.